Kuyoc Roofing will provide you with the most current commercial and residential home roof repair and replacement technologies around. As South Florida's leading roof contractor, we have access to only the
best materials and supplies in and around South Florida -- including Fort Lauderdale, Weston and Boca Raton.

RE-ROOF:

Tear off and dry in:

We will arrive between 7-8 am with our own trucks so no dumpster is required on the drive way and we will park a dump truck on the drive way so while the roof is being tear off all the debris go to the dumpster and haul away. If there is a pool, we will cover with plastic so no nails or/and debris get into the pool. When the old roof is torn off and the sheeting is cleaned, we will re nail it according to code. When the re nailing is done we will install an anchor base sheet attached with tin caps and rink shank nails, install new eave metal, new valley metal, new ventilations, new flashing metals, then prime all the metals and when this process is done we have to call in for a city inspection.

Shingle re-roof:

After tear off and dry in, when we pass the inspection and after shingles delivery we will install it and call for an in progress inspection and after passing the in progress inspection we will finish installing the shingles and call for a roof final inspection. At all commercial and residential roof repair and replacement jobs we clean up at the end of the day the yard and also use a magnet to collect any nails or metal pieces.

Tile re-roof:

After tear off and dry in, hot mop materials will be delivered. A hot mop in progress inspection is required and we will arrive between 7-8 am with a kettle machine that will melt the asphalt. It is strongly recommended for a short period of time. When hot mop is finished and the inspection is passed, we will clean the property and wait for the roof tile delivery.

When roof tiles are delivered we will install the tiles use polyfoam AH 160 system and install ridge metals, also have a in progress tile installation inspection. After passing the inspection, we will finish installing the tiles. Have an up lift test done at the finished roof and call in for a final roof inspection with a copy of the up lift test.

Metal re-roof:

After tear off and dry in inspections, a versa shield is installed as a fire barrier, there is an optional peel and stick sbs modified as a secondary water barrier installed before the versa shield for an additional cost. Then we will form the metal panels on site, and start the metal installation, call in for a metal in progress inspection, after passing the metal in progress inspection we will finish the metal installation and have a final inspection done. After roof replacement job completion we will clean up the yard and also use a magnet to collect any nails or metal pieces.

Flat re-roof:

After tear off and dry in, we will hot mop a ply of ply IV fiber glass in hot asphalt, mop SBS modified bitumen in hot asphalt over the entire roof (there is an optional energy star white sbs modified bitumen for an additional cost and pour white granules over the asphalt running off and have a mop in progress inspection done. The SBS modified bitumen will be overhanging the roof and we will not cut it off until a couple of days after roof replacement job is completed because the paper shrinks when cooled. We will clean up the yard and also use a magnet to collect any nails or metal pieces.

NEW ROOF

Shingle:

After new construction is roof ready, dry in is complete. Once we pass the inspection and after shingles delivery we will install it and call for an in progress inspection and after passing the in progress inspection we will finish installing the shingles and call for a roof final inspection. At all residential and commercial roof contractor jobs, we clean up at the end of the day and also use a magnet to collect any nails or metal pieces.

Tile:

After new construction is roof ready and dry in is complete, hot mop materials will be delivered, a hot mop in progress inspection is required and we will arrive between 7-8 am with a kettle machine that will melt the asphalt which the smell is very uncomfortable its strongly recommended for the homeowner no to be present at this process. When hot mop is finished and the inspection is passed, we will clean the property and wait for the roof tile delivery. When roof tiles are delivered we will install the tiles use polyfoam AH 160 system and install ridge metals, also have a in progress tile installation inspection. After passing the inspection, we will finish installing the tiles. Have an up lift test done at the finished roof and call in for a final roof inspection with a copy of the up lift test.

Metal:

After new construction is roof ready and dry in is complete, a versa shield is installed as a fire barrier. There is an optional peel and stick sbs modified as a secondary water barrier installed before the versa shield for an additional cost. Then we will form the metal panels on site and start the metal installation, call in for a metal in progress inspection, after passing the metal in progress inspection we will finish the metal installation and have a final inspection done. Like with any residential or commercial roof repair and replacement job, we will clean up the yard and also use a magnet to collect any nails or metal pieces.

Flat:

After new construction is roof ready and dry in is complete, we will hot mop a ply of ply IV fiber glass in hot asphalt, mop SBS modified bitumen in hot asphalt over the entire roof (there is an optional energy star white sbs modified bitumen for an additional cost and pour white granules over the asphalt running off and have a mop in progress inspection done. The SBS modified bitumen will be overhanging the roof and we will not be cut it off until a couple of days after the job completion due to the paper shrinks when cooled. Like with any residential or commercial roof repair and replacement job, we will clean up the yard and also use a magnet to collect any nails or metal pieces.